Differences

This shows you the differences between two versions of the page.

--- en:projects:4e4th:start [2018-05-12 12:10] – [Programmer] mka
+++ en:projects:4e4th:start [2018-05-12 12:22] – [Links] mka
@@ Line 465: / Line 465: @@
    If I remove the LaunchPad from the USB while TeraTerm still is running, the connection of the two remains disturbed. Thus Hotplug does not go. So far it only helps to close TeraTerm. Afterwards (!) disconnect LaunchPad from USB, wait for the sound sequence, connect again, and wait for the sound sequence again, then open the terminal.   When using the FET-Pro430 Programmer, follow those instructions, too. I had good experiences to connect the terminal first and then start the Programmer. The MCU can be flashed even when terminal is active. mk
+Looks like the newest TeraTerm can hot plug the Launchpad. mk 20180510
 ====== Acknowledgements ======
@@ Line 470: / Line 472: @@
 Many thanks to the groundbreaking work creating CamelForth done by Brad Rodriguez.
 Thanks to Dirk Bruehl for his untiring and altruistic support of the 4E4th Project, by ordering the appropriate hardware and encouraging with many hints and ideas to go on until CamelForth was running on the LaunchPad.
-mk 03-14-2012
+mk 20120314
+Thank you again, Brad Rodriguez, for transferring CamelForth to Naken Assembler! And thanks to Jürgen Pintaske, who persuaded me to transfer 4e4th to the Naken Assembler. mk 20180512
 ====== Links ======
@@ Line 484: / Line 488: @@
 http://www.ti.com/product/msp430g2553
-(mk20121224)
+revisions mk20121224 mk20180512