Benutzer-Werkzeuge

Webseiten-Werkzeuge


en:attiny

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
en:attiny [2018-05-06 00:55]
mka [Main Features]
en:attiny [2018-05-06 00:57] (aktuell)
mka [Notes regarding the board 3.0]
Zeile 54: Zeile 54:
   - On the board is a power MOSFET that can be powered from the board or via an external power source. It can also turn external devices on and off via an output of the microcontroller if they  require larger currents (e.g., light bulbs or electric motors).   - On the board is a power MOSFET that can be powered from the board or via an external power source. It can also turn external devices on and off via an output of the microcontroller if they  require larger currents (e.g., light bulbs or electric motors).
   - The board is as well prepared for stand-alone operation without the USB cable: All you need to do is to solder a clip connection for 9V batteries, a switch, two capacitors and a 5V regulator on the board.   - The board is as well prepared for stand-alone operation without the USB cable: All you need to do is to solder a clip connection for 9V batteries, a switch, two capacitors and a 5V regulator on the board.
-  - If you are interested in the purchase of one or more boards (as a kit or ready, from about 20 Euro), please contact Mr. Eube directly (eeube@ish.de)+ 
 +//If you are interested in the purchase of one or more boards (as a kit or ready, from about 20 Euro), please contact Mr. Eube directly (eeube@ish.de)//
  
 ===== Documentation ===== ===== Documentation =====
en/attiny.1525560952.txt.gz · Zuletzt geändert: 2018-05-06 00:55 von mka